Stanovíme maximální průhyb čtyř dolních sloupů spojených tuhým blokem nahoře. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Plastická plocha je popsána podle teorie plasticity Tsai-Wu.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. Plastická plocha je popsána podle teorie plasticity Tsai-Wu.
Konzola je na pravém konci zatížena příčnou a normálovou silou a na levém konci je plně fixována. The problem is described by the following set of parameters. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
A long, thin beam is carrying a concentrated mass and is loaded by a time-dependent force. Je prostě podepřený. The problem is described using the following parameters. Determine the deflections in the given test times.
A membrane is stretched by means of isotropic prestress between two radii of two concentric cylinders not lying in a plane parallel to the vertical axis. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. K tomu slouží přídavný modul RF-FORM-FINDING. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
A sphere is subjected to a uniform flow of viscous fluid. The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
Dostupné normy, jako například EN 1991-1-4 [1], ASCE/SEI 7-16 a NBC 2015, uvádějí parametry zatížení větrem, jako je součinitel tlaku větru (Cp ) pro základní tvary. Důležité je, jak rychleji a přesněji spočítat parametry zatížení větrem, než pracovat na časově náročných a někdy komplikovaných vzorcích v normách.
Kelvin-Voigtův materiálový model se skládá z paralelně zapojené lineární pružiny a viskózního tlumiče. V tomto verifikačním příkladu je testováno časové chování tohoto modelu při zatížení a relaxaci v časovém intervalu 24 hodin. Konstantní síla Fx působí po dobu 12 hodin a zbývajících 12 hodin je materiálový model bez zatížení (relaxace). Vyhodnocuje se deformace po 12 a 20 hodinách. Je použita časová analýza s lineární implicitní Newmarkovou metodou.